Chapter 3: Maintenance Basics
28
Remove the seven screws that secure the system board to the case.
6
Slide the system board to the right until it slides free from the case, then
7
remove it completely from the case.
Slide the new system board into place, then replace the seven screws you
8
removed previously.
Replace the heat sink and tighten the four captive screws.
9
Replace the processor fan assembly by following the instructions in
10
"Replacing the processor fan" on page
Replace the half-height PCI card and the PCI riser card by following the
11
instructions in
"Adding an expansion card" on page
Replace the back panel by following the instructions in
12
back panel" on page
Screws
Screws
14.
13.
www.gateway.com
23.
"Replacing the