Setting Up The Hardware - Gateway FMC-901 User Manual

Setting up the hardware

3
2
5
Gateway FMC-901 Media Center
3
2 5
Gateway FMC-901X Media Center
6
4
1
5
1
4
1
1
1
Connect the modem or
broadband Internet (optional)
2
2
Connect the audio/video source
A coaxial (TV in) connection carries both the
audio and video signals.
If you use an S-Video
or a Composite video
connection, you will also
need to connect audio using
RCA or Toslink stereo plugs.
For detailed instructions about connecting the audio/video
source, see page 12.
3
Connect the IR control
Plug one end of the IR control into your
computer, then stick the other end to the
5
2
set-top box sensor window.
For detailed instructions about connecting the IR control
cable, see page 14.
4
Connect to a display
Connect to a monitor or television using a
VGA, DVI, or television cable.
For detailed instructions about connecting to a display
device, see page 15.
5
Connect to an audio system
For detailed instructions about connecting to an audio
system, see page 17.
remove the adhesive
paper from the back of
the IR control