Setting Up The Hardware - Gateway 610S User Manual

Setting up the hardware

1
Connect the modem (optional)
3
Connect the audio/video source
A coaxial (TV in) connection carries both the audio
and video signals.
If you use an S-Video connection,
then also connect audio using
RCA stereo plugs.
For detailed instructions about connecting the audio/video
source (step 3), see page 12.
10
2
4
2
4
3
1
Connect your broadband
Internet (optional)
Connect the IR control cable (optional)
Plug one end of the IR control cable into your
computer, then adhere the other end to the set-top box
sensor window.
Remove the adhesive
paper from the back of
the IR control.
For detailed instructions about connecting the IR control
cable (step 4), see page 13.
3