Gateway 9310 User Manual page 106

Chapter 7: Networking Your Computer
3
Click . The Linksys Properties dialog box opens.
Add
4
Type the name of the network in the
5
Click the arrow button to open the
authentication option you want.
6
If this is a security-enabled network, click the arrow button to open the
list, then click
7
If the WEP network key is not provided automatically, click to clear
for me automatically
and
Confirm network key
- OR -
If the WEP network key is provided automatically, then leave the check mark in
key is provided for me automatically
8
Make sure that the
are not used
9
Click to close the Wireless Network Properties dialog box. Your network should be
OK
running. Go to
100
.
WEP
check box, then type the network key settings in the
boxes to match those set on the access point.
This is a computer-to-computer (ad hoc) network; wireless access points
check box is not selected.
"Testing your network" on page
www.gateway.com
Network name (SSID)
Network Authentication
check box.
104.
box.
list, then click the network
Data encryption
The key is provided
Network key
The