Apollo Precedus; Apollo 920 - Garmin Waypoint Manager User Manual

7. The PC will read the software, wait for the 360 to erase the
old software, then send the blocks of data. After the data
has been sent, the PC is finished, but the 360 must still
verify the new software. The 360 will display "PASS" or
"FAIL". If the message is "pass," continue. If the message
is "fail," try again. If the procedure continues to "fail," call
technical support.
8. You can now exit from Waypoint Manager.
9. Follow the directions shown on the 360 screen.

Apollo Precedus

1. Make sure the serial cable connects the Precedus to the PC.
2. Start Waypoint Manager.
3. In the File menu item, click on Application, and then select
the "Send Application to GPS Unit" options on the PC.
4. Send the software to the Precedus.
5. The PC will read the software. Wait for the Precedus to
erase the old software, then send the blocks of data. After
the data has been sent, the PC is finished, but the
Precedus must still verify the new software. The Precedus
will display "PASS" or "FAIL." If the message is "pass,"
continue. If the message is "fail," try again. If the
procedure continues to "fail," call technical support.
6. You can now exit from Waypoint Manager.
7. Follow the directions shown on the Precedus screen.

Apollo 920

The Apollo 920 does not allow for application software update
from the PC.