System Info; Software Version; Low And High Display Intensity - Garmin SL30 Pilot's Manual

System Info

System Info provides information about the Software versions and the Display Intensity.
SYS
1. Press and turn the LARGE knob if necessary to the System Info page. Press ENT.
2. Turn the LARGE knob to view the selections.

Software Version

The Software version is available for reference when you contact Technical Support.
1. In the System Info function turn the LARGE knob to Nav software version.
2. Turn the SMALL knob to view the Nav, Com, and DSP software versions.

Low and High Display Intensity

As it arrives from the factory, the SL30 automatically adjusts its display brightness for
the current lighting conditions. A small sensor at the upper left of the display is used for
this function. There are two adjustments available for controlling the brightness level of the
display. The first controls the lower brightness level in the automatic adjustment range (Low
Display Intensity). This is the brightness used when in total darkness. The second adjusts the
upper limit of this range (High Display Intensity). This is used when bright light is shining
on the display.
The factory settings for these are at the limits of the range, 0 (Low Display Intensity) and
100 (High Display Intensity). The range can be adjusted by using the SMALL knob to adjust
the two values.
Some users may wish to disable the automatic dimming function. This can be accom-
plished by setting the high display level to zero. Now the low level adjustment will set the
brightness of the display directly with no automatic adjustment made based on ambient
light.
Advanced Operation
System Mode
29