Operation Summary; Power On - Garmin SL30 Pilot's Manual

Power On

Turn the SL30 on. Either turn the Power/Volume knob clockwise to turn the power on or,
if installed, turn on the master switch that powers the radios.
The SL30 will go through a short initialization routine and then briefly display the last
VOR check date. If you turn the SL30 off for less then 15 seconds and then back on, it will
bypass the initialization process and return to the last used display.
Nav
Comm
Mode Mode
Large - MHz Large - MHz
Small - kHz Small - kHz
Com - Monitor Nav - Monitor

Operation Summary

System
Mode
System Info
Nav Options
Com Options
VOR Equip Test
OBS
Mode
Large - Tens of degrees
Small - ones of degrees
Getting Started
5