View Menu; Help Menu - Garmin GPS 15 Technical Specifications

Garmin gps 15 oem/sensors-engine: technical spec

Hide thumbs Also See for GPS 15:

Table of Contents

Get Configuration From GPS (F8): Retrieves the current programming from the sensor. The

programming is then displayed in the Main Interface Window.

Send Configuration To GPS (F9): Sends the changes you have made to the programming to the sensor.

Switch to NMEA Mode (F10): Switches the unit to NMEA Mode. The sensor must be in NMEA Mode in

order to establish a serial connection to this software (see "Connecting to the Sensor" above).

Switch to Garmin Mode (F11): Switches the unit to Garmin Mode.

Update Software (F12): Not applicable for the GPS 15. After you have downloaded a new software

version for the sensor, you can update the sensor with the new software. Select Update Software and then

select the file using the Open dialog box. You must locate both the *.rgn file and the updater.exe file.

View Menu

The View Menu allows you to view the NMEA sentences transmitted by the sensor. You can also

customize how the program looks by showing and hiding the Toolbar and Status Bar.

The Help Menu displays the software version and copyright information.

GPS 15 Technical Specifications (P/N 190-00266-00)

Rev. B

Page 21

Table of Contents