Chapter 2: Accelerator Card Overview; Card Features - Xilinx VCK5000 Installation Manual

Accelerator Card Overview

Card Features

The following table lists the features of the VCK5000 evaluation card.
Table 1: Summary of Card Features
ACAP Device
Configuration Options
Memory
DDR Maximum Data Rate
JTAG and UART Debug Interface
Edge Connector Interface
Network Interface
ACAP VCCINT VRM
Satellite Controller (SC)
Temperature Monitoring
Power Monitoring
Status LEDs
Form Factor
Electrical Design Power
ACAP Maximum Power
Total Design Power (TDP)
Notes:
1. Refer to Alveo Programming Cable User Guide (UG1377) for more information.
UG1531 (v1.0) March 4, 2022
VCK5000 Hardware Install Guide
Feature

Chapter 2: Accelerator Card Overview

Summary
XCVC1902-2MSEVSVD1760
2 Gb OSPI memory MT35XU01GBBA2G12-0SIT
Configurable over OSPI, OSPI + PCIe
16 GB - four 4 GB modules, part MT40A512M16TB-062E:J
3200 MT/s
JTAG and UART access through USB and Maintenance connector.
PCIe Gen. 3 x16 / 2x Gen. 4 x 8 / Gen. 4 x 8 /CCIX
2x QSFP28
Support 2 x 100GE, 2 x 25GE, 4 x 10GE, with 2 x 1 cage mounted.
6 phases. PMBUS control for VOUT, temperature, and current.
MSP432P4111IPZR
ACAP (internal monitoring), QSFP, inlet and outlet on-board
thermal sensors.
PCIe 12V, AUX0, AUX1, and VRM VCCINT & 1.2V
Activity LED
Passive configuration: 3/4-length, full height, double slot, x16 PCIe
form factor.
Active configuration: full length, full height, double slot, x16 PCIe
form factor.
300W with 210A max ACAP power using the following:
•
6-pin PCIe AUX power
•
8-pin PCIe AUX power
•
PCIe slot power
165W
225W
Send Feedback
Chapter 2
®
1
www.xilinx.com
5