3.1.11 BAT1 : RTC Battery
The system's real-time clock is powered by a lithium battery. It is equipped with lithium battery.
It is recommended that you shouldn't replace the lithium battery on your own. If the battery
needs to be changed, please contact the EverFocus Technical Support team
ts@everfocus.com.tw.zk
3.1.12 FN1 : FAN Header
Fan power connector supports for additional thermal requirements. The pin assignments of
FAN 1 are listed in the following table.
Pin No.
Definition
1
GND
+12V (1.5A
2
max)
27
eIVP-CFS-IV-V0004
Pin No.
Definition
Fan speed
5
sensor
6
Fan PWM