Governor Linkage - DeWalt DW168F Manual

Governor Linkage

MoDEls DW168F-2F, DW177FD-F, DW188FD-F
X4. Control base cover
Y4. Shroud bolt (3)
Z4. Throttle stop screw
A5. Adjusting spring
b5. Governor spring
C5. Governor arm nut
D5. Governor arm bolt
E5. Governor arm
f5. Governor rod
G5. Governor spring
H5. Idle control solenoid
I5. Solenoid bolts (2)
The long end of the governor spring (B5)
goes toward the control lever and the short
end hooks into the governor arm (E5).
b5
Y4
X4
The long end of the governor
spring (G5) goes toward the
governor arm (E5).
Y4
A5
E5
G5
Y4
After assembling throttle stop screw (Z4)
and adjusting spring (A5), see Speed/
Governor Adjustment under Maintenance.
Z4
36
C5
D5
H5
f5
I5