What's Included - Garmin GTM 11 Owner's Manual

C GTM 11
ONNECTING THE

What's Included

• GTM 11 with LED and mini-USB plug
• Whip antenna (stiff antenna)
• Wire antenna (flexible wire antenna)
• Hook-and-loop fasteners
• Double-sided tape
Step 1: Snap the antenna on the GTM 11
You can use either the whip or wire antenna for your GTM 11. Use the
traditional whip antenna for most installations. If you want to completely
hide your GTM 11, use the wire antenna. Also, use the wire antenna if the
whip antenna does not get an adequate signal strength.
1. Align the tab on the antenna with the front of the GTM 11.
Antenna Tab
2. Snap the antenna onto the connector on the GTM 11. The
antenna clicks indicating it is locked in place. You might have to
wiggle it a bit to properly get it to click.
To remove the antenna from the GTM 11, press the antenna connector's
tab. Pull the antenna off the GTM 11.
2
C GTM 11
ONNECTING THE
Step 2: Connect the GTM 11 to your GPS
device
Connect the mini-USB plug on the GTM 11 cable into the mini-USB
connector on your Garmin GPS device.
Step 3: Connect your Garmin GPS to external
power
Connect your GPS device to external power. Turn the GPS device on, if it
GTM 11
does not turn on automatically.
NOTE: When using the GTM 11, your Garmin GPS device must be
LED
connected to external power.
mini-USB
plug
GTM 11 Owner's Manual