Carrier AquaForce 30XW-V Installation, Operation And Maintenance Instructions page 27

10 - OPTIONS
Options
Dual relief valves on 3-way
valve
Compliance with Swiss
regulations
Compliance with Russian
regulations
Compliance with Australian
regulations
Low noise level
Welded evaporator water
connection kit
Welded condenser water
connection kit
Flanged evaporator water
connection kit
Flanged condenser water
connection kit
Thermal compressor
insulation
EMC classification C2, as per
EN 61800-3
Compliance with UAE
regulation
Compliance with Morocco
regulation
No. Description
194 Three-way valve upstream of dual relief valves
on the evaporator and the oil separator
Additional tests on the water heat exchangers.
197 Additional supply of PED documents,
supplementary certificates and test certificates.
199 EAC certification
200 Unit approved to Australian code
257 Evaporator piping sound insulation
266 Victaulic piping connections with welded joints. Easy installation
267 Victaulic piping connections with welded joints. Easy installation
268 Victaulic piping connections with flanged joints. Easy installation
269 Victaulic piping connections with flanged joints. Easy installation
The compressor is covered with a thermal
271
insulation layer
282 Additional RFI filters on the unit power line
Additional label on the unit with rated power
318 input, rated current and EER following AHRI
550/590
327 Specifics documents according Morroco
regulation
Advantages
Valve replacement and inspection
facilitated without refrigerant loss.
Comforms to European standard EN378/
BGVD4
Conformance with Swiss regulations
Conformance with Russian regulations
Conformance with Australian regulations
3 dB(A) quiter than standard unit
Prevents air humidity to condensate on the
compressor surface
Reduces electromagnetic interferences.
Increase the variable frequency drive
(VFD) immunity level according to first
environment (so called, residential
environment) requirements and allow its
compliancy with emissions level required in
category C2
Compliance with ESMA standard UAE.S
5010-5:2019.
Conformance with Morocco regulations
Use for 30XW-V
range
580-1710
580-1710
580-1710
580-1710
580-1710
580-1710
580-1710
580-1710
580-1710
580-1710
580-1710
580-1710
580-1710
27