Activating The Simulator - Garmin GPSMAP 2006 Owner's Manual & Reference

Activating the Simulator Mode:
1. Press the MENU key.
2. With the 'GPS Info' tab displayed, at the lower left of the display will be a SOFT KEY label 'Start Simula-
tor', press the SOFT KEY that corresponds with this option. Choose 'No' to the retail demonstration and
press ENTER/MARK . Press ENTER/MARK again to acknowledge the Running Simulator/Sonar Message.
3. The "Simulator Setup" window will be displayed.
There are seven parameters that can be set for the simulator: "Current Time", "Current Date", "Track
Control", "Track", "Speed", "Transducer" and "Set Position" (SOFT KEY). We need to change the "Current
Time" and "Current Date" settings.
There are two methods that you can use when entering alpha-numeric data, one is the
ARROW KEYPAD and the other is the DATA ENTRY keys. We will use the ARROW KEYPAD for set-
ting the Current Time and Current Date. See page 7 for instructions using the DATA ENTRY keys.
Current Time:
1. Using the ARROW KEYPAD , highlight the "Current Time" field and press the ENTER/MARK key.
2. Using the Right/Left function of the ARROW KEYPAD , place the highlight on the correct digit to begin
entering the current time.
3. Using the Up/Down function of the ARROW KEYPAD , scroll through the list until the correct number is
displayed. Press the ARROW KEYPAD to the right to highlight the next digit.
4. Continue this process until the correct "Current Time" is displayed then press the ENTER/MARK key to
accept the new time.
Current Date:
1. Using the ARROW KEYPAD , highlight the "Current Date" field and press the ENTER/MARK key.
2. Using the Right/Left function of the ARROW KEYPAD , place the highlight on the correct digit to begin
entering the Current Date.
3. Using the Up/Down function of the ARROW KEYPAD , scroll through the list until the correct number is
displayed. Press the ARROW KEYPAD to the right to highlight the next digit.
4. When the month is highlighted the Up/Down function of the ARROW KEYPAD will scroll through a list of
the months. Select the current month then move to the next digit.
5. Continue entering the date. When finished, press the ENTER/MARK key to accept the new date.
Getting Started Getting Started
Using the Built-in Simulator Main Page Sequence
Select this SOFT KEY to start the Simulator
After the 'Start Simulator' SOFT KEY has been pressed, the
"Simulator Setup" window will be displayed. Set the current
time and date, and change the "Track Control" to 'User Track'.
When finished press the QUIT key to begin simulation.
5 5