Projecting Waypoints - Garmin GPSMAP 176 Owner's Manual

Projecting Waypoints

A waypoint may also be created by projecting the distance and
bearing from a specific location to a new location. Start by accessing
the New Waypoint page or the New Map Waypoint page.
Select a point from which to project a new waypoint.
GPSMAP 176/176C Owner's Manual
B O
ASIC PERATION
To create a new waypoint by projecting its location:
1. Create a new waypoint using one of the methods previously
described. The New Waypoint page is now on your screen.
2. Verify the field to the right of the word From reads Current
Location. If it does not, highlight the field and press ENTER/
MARK, select Current Location, and press ENTER/MARK.
3. Highlight the distance and/or bearing fields below From
Current Location and press ENTER/MARK. Use the
ROCKER to enter the projected distance and bearing from
your current location for the new waypoint and press ENTER/
MARK.
4. Make any other desired changes to the new waypoint data,
such as the name and symbol, highlight OK, and press
ENTER/MARK.
> C U W
REATING AND SING AYPOINTS
15