Garmin GPS 95 STD Personal Navigator Owner's Manual page 98

To attach the yoke mount to the control yoke...
· Loosen the lower knob.
· Slide the clamp over the control yoke shaft just behind the control
wheel.
· Tighten the lower knob securely.
· Make sure that the clamp is as close as possible to the control wheel
and check to make sure that the yoke travel is not limited or
hindered in any way by the yoke mount.
To adjust the yoke mount viewing angle...
· Loosen the upper knob.
· Rotate the bracket up or down on the ratchet.
· Tighten the upper knob securely.
C-5