Front - Panasonic VariCam AU-VREC1G Operating Instructions Manual

Description of Parts
3 <USB HOST> terminal (inside the cover, 5.0 V 0.5 A max)
For mounting the wireless module AJ-WM30 (optional).
For the cable to connect to this terminal, prepare a double-shielded cable.
4 <TC IN/OUT> terminal
Connects to the time code input terminal of the external device when locking the time code of the
external device to the time code on the camera.
For the cable to connect to this terminal, prepare a double-shielded cable equivalent to 5C-FB.
5 <GENLOCK IN> terminal
Inputs reference signals when setting the genlock on the camera unit or when externally locking the
time code. The input signal is 3G/HD-SDI.
For the cable to connect to this terminal, prepare a double-shielded cable equivalent to 5C-FB.
6 <MON OUT1>/<MON OUT2> terminal
3G/HD-SDI output terminal of videos for the monitor.
For the cable to connect to this terminal, prepare a double-shielded cable equivalent to 5C-FB.
7 Fan outlet
Fan outlet for dissipating heat. Do not block this when the camera is in use.
8 <USB DEVICE> terminal
USB device terminal for connecting a USB 2.0 cable.
For the cable to connect to this terminal, prepare a double-shielded cable.
9 <LAN> terminal
For connecting a LAN (100BASE-TX) cable.
For the cable to connect to this terminal, prepare a shielded cable.

Front

1 Lock angle
Fitting which secures the camera unit (optional) in place when connected.
2 Camera unit connection terminal
Terminal for connecting the camera unit (optional).
18
1
2