Right Side - Panasonic VariCam AU-VREC1G Operating Instructions Manual

12 <POWER> switch
Switch on/off the power.
Even when the <POWER> switch is set to the <OFF> position, the camera is not shut off from the main
power.
13 Jog dial button
Used for setting, moving items, and selecting menus on the control panel.
14 <LOCK> switch
Disables the operation of the control panel buttons and switches. (except the <REC> button)
Keep this in the <LOCK> position to prevent incorrect operation when moving the camera, etc.
15 Cable clamp
Clamp for securing the control panel extension unit cable.
16 Open/close switch for sub slot and SD memory card slot
Opens the sub slot / SD memory card slot bay.
17 Main slot lock switch 1/2
Lock switch to prevent incorrect insertion and removal in the main slot.
Recording is enabled when this is locked.
Do not release the lock during recording.
18 Main slot 1/2 access LED
Indicates the access status of recording and playback of each card inserted in main slot 1/2.
19 Main slot 1/2
Slot for expressP2 memory cards.
20 Sub slot 3/4 access LED
Indicates the access status of recording and playback of each card inserted in sub slot 3/4.
21 Sub slot 3/4
Slot for microP2 memory cards.
22 SD memory card slot
Slot for SD memory cards (optional). SD memory cards are used for opening the camera setting menu,
recording/opening lens files, or uploading metadata.

Right side

1 <SDI OUT1>/<SDI OUT2>/<SDI OUT3>/<SDI OUT4> terminal
Output terminal for 3G/HD SDI. This terminal outputs videos in SINGLE, DUAL, or QUAD mode.
For the cable to connect to this terminal, prepare a double-shielded cable equivalent to 5C-FB.
2 Light output terminal
Power supply terminal when light is connected.
1
2
3
4
5
6
Description of Parts
7
8
9
17