Epson XP-8700 Start Here

XP-8700 Small-in-One
Start Here
IMPORTANT: Before using this product, make sure you read
these instructions and the safety instructions in the online
User's Guide.
This printer is designed for use with Epson
Note:
third-party cartridges or ink. For important ink information, visit
http://epson.com/epsonink (U.S.) or http://epson.ca/epsonink
(Canada) or see your printer box.
1
Unpack
Note:
• Do not open ink cartridge packages until you are ready to install the
ink. Cartridges are vacuum packed to maintain reliability.
• Do not throw away the protective material shown above. Tape this
piece to the top of the ink cartridge holder when transporting your
product. For more information, see the online User's Guide.
• The CD/DVD tray is stored underneath cassette 2.
1
Remove all tape and packing materials from the product.
2
Lift up the scanner unit. Remove all tape and packing
materials from inside the product.
Do not touch the flat, white cable.
Caution:
cartridges only, not
®
Protective
material
3
Lower the scanner unit.
4
Connect the power cord to the back of the printer and to an
electrical outlet.
Do not connect to your computer yet.
Caution:
2
Choose a setup method
The Epson Smart Panel app can help you set up your printer
®
through an interactive, step-by-step process using your
smartphone or tablet.
To use your mobile device
for setup, continue to
step 1.
1
Download the Epson Smart Panel app
from your device's app store. Do not
launch the app yet.
2
Press the power button to turn on the product.
Do not connect your product to your computer yet.
Note:
3
Launch the app and follow its instructions to set up your
product.
For information on connecting your product to a computer, using
voice-activated printing, or solving problems, or for details on
reaching Epson support, see the sections on the back of this
sheet.
or
If you do not want to use
a mobile device for setup,
skip to the "Turn on and
configure" section.