Epson XP-610 Small-in-One Start Here
Hide thumbs
Also See for XP-610 Small-in-One:
- Quick manual (17 pages) ,
- Quick start (4 pages) ,
- Guía de instalación (2 pages)
Advertisement
Quick Links
XP-610/XP-810 Small-in-One
Start Here
1
Unpack
2
Turn on and configure
1
2
Caution: Do not connect to your computer yet.
3
Install ink cartridges
Shake the BK (black)
cartridge only.
4
Load paper
Read these instructions before using your product. The illustrations show the XP-810, but the steps
are the same for the XP-610.
1
2
Note: Store the caps in the included
plastic bag. Use them to recap the
ink cartridges after removing them
for storage or disposal.
Printer
®
1
Select your language, country, date and time if applicable.
Note: You can change these settings later using the product's control
panel. For more information, see the online User's Guide.
Note: The cartridges included with the printer are designed for printer set up and
not for resale. After some ink is used for priming, the rest is available for printing.
Caution: Don't turn off the printer or raise the scanner unit while the printer is
priming or you'll waste ink.
Note: Do not open ink
cartridge packages until
2
you are ready to install the
ink. Cartridges are vacuum
packed to maintain reliability.
Advertisement
Related Manuals for Epson XP-610 Small-in-One
Summary of Contents for Epson XP-610 Small-in-One
-
Page 1: Install Ink Cartridges
XP-610/XP-810 Small-in-One Printer ® Read these instructions before using your product. The illustrations show the XP-810, but the steps Start Here are the same for the XP-610. Unpack Note: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Turn on and configure Select your language, country, date and time if applicable. Note: You can change these settings later using the product’s control panel. For more information, see the online User’s Guide. Caution: Do not connect to your computer yet. - Page 2 Connect the phone cord to a telephone wall jack and to the LINE port on your product. See the online User’s Guide for more information. Any questions? Install software Quick Guide Using the CD Basic information and troubleshooting. M ake sure the printer is NOT CONNECTED to User’s Guide your computer. Click the icon on your desktop (or in the Applications/Epson Software/Guide folder W indows ® : If you see a Found New Hardware screen, click Cancel and disconnect the USB cable. in Mac OS X) to access the online User’s Guide. I nsert the product CD and follow the instructions on the screen to run the setup program. M ac OS X: Make sure you install Software Updater; internet connection required. W hen you see the Select Your Connection screen, select one of the following: •...