Table of Contents
Advertisement
STEP 3
PAIRING
1.
Unscrew the TEMPUS DC LCD's cap.
2.
Install the 9V alkaline battery or the 4 x 1.5V AAA battery
pack. Ensure the gasket is in place and tighten the battery
compartment cap to hand tight. Be careful to not over
tighten the cap.
3.
Launch the TEMPUS DC App.
4.
Tap on the «Add a module» button or on the «+»
button.
5.
Choose the TEMPUS DC LCD from the list of nearby
controllers.
6.
To finish the pairing of your TEMPUS DC LCD, follow
the next steps described in the app.
7.
After pairing, select the "Power source" (9V or AAA) in
the APP, Information Menu
Starting Display
.
OPERATION WITH BUTTONS
Thanks to its large display and keys, the Tempus DC LCD
can be programmed in absence of a smart device and app.
Display
Main Menu
Battery level indicator
HOME/Menu
Setting button + or -
ENTER/Confirm button
Toro TEMPUS DC LCD Controller 1 _ 2 _ 4 _ 6
5
Advertisement
Table of Contents
