App Download - Toro TEMPUS DC LCD User Manual

Toro TEMPUS DC LCD Controller 1 _ 2 _ 4 _ 6
STEP 1
WIRING
1. Connect the TEMPUS DC LCD to the solenoids as described
below. Use 9VDC solenoid (latch type).
+S- C P 1 2 3 4 5 6 C
Sensor
wire
2. You can connect on the P output a master valve. The
output will automatically start 2s before each station and
during the watering of each stations.
+S- C P 1 2 3 4 5 6 C
Sensor
wire
3. (Option) If you want to install a rain sensor, cut the yellow
wire of the TEMPUS DC LCD and connect it to the sensor.
When connected, the rain sensor will affect all four
programs. With the rain sensor active, programs A, B,
C, and D will be suspended in the event of rain. Normal
irrigation will not resume until after the rain sensor has
completely dried out. Manually starting a station or program
will override the rain sensor.
+S- C P 1 2 3 4 5 6 C
4
STEP 2

APP DOWNLOAD

1. The mobile app is available free of charge on the Apple App
Store and Google Play Store.
2. Search for The Toro Company in the search bar.
Developer
The Toro Company
3. Locate and download the Tempus DC app.
To operate properly, your Android device should be running
Android 4.3 or greater and feature Bluetooth Smart 4.0 or
greater, while Apple devices should be running iOS 9.0 or
greater and feature Bluetooth Smart 4.0 or greater.
4. Once installed, activate the Bluetooth® of your smartphone
or tablet.