Setting Up Your Nüvi; Mounting Your Nüvi - Garmin 1450LM Quick Start Manual

Setting Up Your nüvi
Before mounting the nüvi, see the Important Safety and Product Information guide for information
about laws pertaining to windshield mounting.
Mounting Your nüvi
1. Remove the clear plastic from the suction cup.
Place the suction cup on the windshield.
2. Flip the lever back toward the windshield.
3. Snap the cradle onto the suction cup arm.
4. Plug the vehicle power cable into the back of
your nüvi.
5. Plug the other end of the vehicle power cable
into a power outlet in your vehicle. Your unit
should turn on automatically if it is plugged in
and the vehicle is running. Follow the on-screen
instructions.
6. Fit the bottom of your nüvi into the cradle.
7. Tilt your nüvi back until it snaps into place.
8. If you are using a traffic receiver in Europe,
connect the external antenna to the traffic
receiver and secure it to the windshield using
the suction cups. (Traffic receivers are included in some nüvi packages.)
Warning: This product contains a lithium-ion battery. To prevent damage, remove the unit from the
vehicle when exiting or store it out of direct sunlight.
nüvi 1400 Series Quick Start Manual
Suction cup mount Suction cup mount
Cradle Cradle
Vehicle power cable Vehicle power cable