Advertisement
Loudspeaker System Specifications
*
Each channel has a level control and a 3-band EQ section to adjust and
shape the input signals
*
Mix/Thru Output is via a male XLR jack
*
Durable plastic injection-molded trapezoidal enclosure
*
Extra angled section on right side allows floor monitor use
*
Full-coverage heavy-duty perforated steel grilles, with powder coat finish
Pole mount molded-in for 1 3/8" diameter poles
*
*
Top, bottom and right side flying point inserts
Description
The PVX™p 15 Bluetooth® is a two-way sound reinforcement system based on
a heavy-duty Pro 15 15" woofer and a RX14™ titanium diaphragm dynamic
compression driver mounted on a 100 by 50 degree coverage Quadratic Throat
Waveguide™. It's sleek, modern appearance coupled with excellent
performance, offer a superb overall package.
The lightweight yet rugged injection-molded plastic enclosure with molded-in
stand mount cup facilitates portable use for live music or PA sound. The
trapezoidal cabinet has three handles for ease of portability, and an extra 45-
degree angled section on the right side to allow use as a floor monitor. Five sets
of flying/mounting points, two on the top, two on the bottom, and one on the side,
with a total of 16 cabinet inserts, provide for the ultimate in installation flexibility.
A pair of black powder coated perforated steel grilles provides driver protection
and a professional appearance.
The heavy-duty 15" woofer has a 2 3/8" voice coil diameter, and a 50 oz. magnet
for chest-pounding bass. The RX14™ compression driver tweeter is coupled to
a Quadratic Throat™ constant directivity waveguide. The Quadratic Throat
Waveguide™ is an original Peavey® design, with smooth, even response, low
distortion and good high frequency dispersion. This horn has an asymmetrical
vertical polar response, aiming the main energy lobe down 10 degrees, so it is
aimed at the audience, instead of over their heads. The vertical polar pattern is
+15 degrees, -35 degrees. This helps reduce ceiling reflections for greater clarity
and gain before feedback.
The PVX™p 15 Bluetooth® speaker system power amplifiers providing the bi-
amplification are low-distortion reliable fan-cooled units providing a total of 980W
peak dynamic power for the system.
There is 840 W peak dynamic power for the woofer, and 140 W peak dynamic
power for the tweeter. The power supply for both amps is a switch mode type for
low weight and high efficiency. Both amplifiers feature sophisticated DSP based
signal compression, which virtually eliminates audible power amplifier clipping.
2
Advertisement
