Advertisement
Loudspeaker System Specifications
Fig. 30 Output Parameter, Mix Out Selected
Mix Out sends the signal present at CH1, CH2 and the Bluetooth® CH3 all mixed
together to the Output jack.
Link Out sends just the signal present at the CH1 input to the Output jack, see
Fig. 31
Fig. 31 Output Parameter, Link Out Selected
Bluetooth® Controls
How to Turn OFF the blinking Bluetooth® LED (8) if you are not going to be
using Bluetooth®
From Fig. 1 the Main Start Screen, if you turn the "Push for DSP" knob (9) CW
one notch, then the BT menu header will become highlighted, see Fig. 32 below.
Pushing in the "Push for DSP" knob in selects the BT menu, see Fig 33 below.
Turning the "Push for DSP" knob CW two notches selects the Streaming
parameter, see Fig. 38 below.
Push in the "Push for DSP" knob to enter the Streaming menu, and turn the
"Push for DSP" knob one notch CW to select OFF, see Fig. 39 below.
Push in the "Push for DSP" knob to turn the Streaming OFF, and the Bluetooth®
LED (8) will turn OFF.
Then, turn the "Push for DSP" knob two notches CCW to reach the blue Exit
arrow (See Fig. 16 for the Exit arrow circled in Red) and press the "Push for
DSP" knob in to return to the menu screen with the Bluetooth® menu highlighted
(Fig. 32), then rotate the "Push for DSP" knob CCW one notch to return to
the Main menu screen of Fig. 1
Bluetooth® Functions
26
Advertisement
