Advertisement
Loudspeaker System Specifications
Fig. 3 Main (Master) Channel Gain +3 dB
The Main (Master) Channel gain is variable from +10 dB to -80 dB.
CHANNELS 1 THRU 3 ADJUSTMENTS
If from the Main Start Screen of Fig. 1, you notch the "Push for DSP" knob CCW
4 times, then you end up highlighting the CH1 segment, see below:
Fig. 4 Main Screen - CH1
Then if you push in the "Push for DSP" knob in, you will get the menu for
Channel 1's controls. These consist of three bands of EQ, and an adjustable
high pass filter. See Fig. 5 below:
Fig. 5 CH1 Selections
Turn the "Push for DSP" knob one notch CW, and the High EQ band is selected.
Push in the knob to activate the EQ slider. Now turning the knob CW increases
the HF boost above 8 kHz up to 6 dB, then turning it all the way CCW the high
frequencies are cut by 6 dB, in 1 dB increments.
See Fig. 6 and Fig. 7
16
Advertisement
