Advertisement
Loudspeaker System Specifications
Note that this LED indication when the Limit parameter is selected does NOT
indicate amplifier clipping or system distress, it is OK for it to turn RED on a
regular but intermittent basis, as it just confirms that the compression and limiting
system is doing it's job providing as much clean and unclipped output as
possible. However, in the event that the LED is lighting up RED more often than
not, it would be wise to turn down the drive level, so that excess compression
does not occur to the sound.
ABOUT Header
From the Main Start Screen (Fig. 1), you turn the "Push for DSP" knob three
notch's CW, and the About header will be highlighted. See Fig. 56
Fig. 56 About header highlighted
Press in the "Push for DSP" knob, and the About menu will be selected, see Fig.
57
Fig. 57 About Menu
This displays the Model number of the PVXp, the firmware version, and the
Restore function. Turn the "Push for DSP" knob, and the Restore function will be
highlighted, see Fig. 58
Fig. 58 Restore Function Selected
35
Advertisement
