Table of Contents
Advertisement
KVM over IP Console Station User Manual
Options
Video Auto-Sync
Click Video Auto Sync to have the vertical and horizontal offset
values of the remote screen detected and automatically
synchronized with the local screen.
Note:
Preset /
Using the Preset and Custom buttons allow you to set and save
Customization
custom video settings, and revert back to default video settings.
Performance
Use the slide bar to select the type of Internet connection that the
console station uses. Dragging the performance bar will also
automatically adjust the Video Quality settings to optimize the
quality of the video display.
Since network conditions vary, if none of the preset choices seem
to work well, you can use the Video Quality slide bar to adjust the
settings to suit your conditions.
Enhanced Text
Check to enhance color and video quality, especially for texts.
Mode
Video Quality
Drag the slider bar to adjust the overall Video Quality. The larger
the value, the clearer the picture and the more video data goes
through the network. Depending on the network bandwidth, a high
value may adversely effect response time.
Set to Grayscale
Check to set video display to grayscale.
80
Description / Operation
1. If the local and console station mouse pointers are
out of sync, in most cases, performing this function
will bring them back into sync.
2. This function works best with a bright screen.
3. If you are not satisfied with the results, use the
Screen Position arrows (on the right) to position the
remote display manually.
Advertisement
Table of Contents
