Table of Contents
Advertisement
KVM over IP Console Station User Manual
Note: 1. Please use the KVM credentials to login.
2. Click on "Clear History" to remove the history of all connected
devices.
Follow the steps below to log in:
1. If you wish to log into a KVM device directly, select "KVM over-IP
Switch" from the drop down menu, specify the device's IP address and
port, and go to the next step.
Or
For the KVM over IP console station login, select "Console Station" from
the drop down menu and go to the next step.
Note:1. As an alternative, you can drag your mouse over the magnifying
glass symbol to find the addresses of the devices on the same local
area network; or.
2. Click the drop-down menu for a device list. The device list shows
the device login history. The history can be cleared using a
terminal command, please see Terminal on page 71.
2. Enter a Username and Password (by default Username and Password are
administrator and password, respectively) and click Login.
Note: For security purposes, you should change the Username and
Password. (See Users and Groups on page 42)
3. (Optional) At the bottom-right corner, a language option is available
(English is shown as it is the default language). Click to select a preferred
language for the interface.
After you successfully login, the dashboard of the console station appears.
Please refer to Dashboard on page 18 for details.
14
Advertisement
Table of Contents
