ATEN Altusen KA8270 User Manual page 56

KVM over IP Console Station User Manual
Field
Username 1 to 32 characters are allowed depending on the Account Policy
settings. See Account Policy on page 61.
Password 0 to 32 characters are allowed depending on the Account Policy
settings. See Account Policy on page 61.
Confirm To make sure there is no mistake in the password, please enter it
Password
again. The two entries must match.
Description Additional information about the user that you may wish to include.
Allow Share Select to allow sharing of port screen contents to another KVM over
Screen to
IP Console Station within the network.
Remote
Note: This function is enabled by default.
Role There are two categories: Administrator and User. There is no
limitation on the number of accounts that can be created in each
category.
The Administrator is responsible for the overall installation
configuration and maintenance; user management; and device
assignments.
Each user assigned to administrator role will have the privilege of
adding KVM over IP switches by default.
Please refer to Using User Configuration Page on page 47.
Status Status allows you to control the user's account and access to the
installation, as follows:
 Disable Account lets you suspend a user's account
 To require a user to change his password at the next
 To make a password permanent, so that the user cannot
If you choose Groups in the side menu, click Add Group for the page
below:
44
without actually deleting it, so that it can be easily
reinstated in the future.
logon, select User must change password at next logon.
This can be used by the administrator to give the user a
temporary password to log in for the first time, and then
let the user set the password of his choice for future
logins.
change it to something else, select User cannot change
password.
Description