GN 1000 en option [2.6] For your comfort, put on the ear (RHL), raccordez-le au cushion. Place the headset into the base port désigné par AUX sous la base. Référez- for charging. Setting-up is now complete. vous au Guide de l’util- isateur du GN 1000 RHL pour l'utilisation du levier.
Page 4
12 hours of talk time. [3.4] Your headset is ready for use. Note: When not in use, place the headset in the Base to charge battery, ensuring the link- up indicator is not lit. If the battery charge is too low, a beep will be heard in the headset every 20 seconds.
Page 5
Low power mode (Europe only). By [4.2] If you do not hear a dial tone in the default, your GN 9120 headset, move the telephone termination operates in standard power mode. If you switch along the A-G range until the dial tone experience interference is clear.
Page 6
[5.3] Match the “L” or “R” inside the ear plate with the square hole on the headset. Click the earhook on to the headset receiver. Change wearing ear (L or R) The buttons on the headset must be facing upwards.
Page 7
The link will be established and the link-up manuellement le combiné indicator will light. pour répondre à un appel ou y mettre fin, le GN 9120 [6.5] Lift the telephone’s handset and peut être couplé avec le listen for a dial tone in your headset.
Page 8
When volume reaches max or min, you will hear a beep in headset. Tone control adjustment [7.7] Make a telephone call and ask the person you are calling to assist you.
Page 9
4 headsets may participate in the conference mode. If [8.3] During the call, place another headset you have further GN 9120 into the base. Keep in base until all base lights functionality questions, stop flashing and only the battery – and link consult the enclosed user indicator are lit.