Magnadyne Sirius M9900DVDS Installation And Operation Manual page 16

Sirius Satellite Radio Operation
Direct Tuning:
1. Push the TUNE knob until "DIRECT" appears in the display.
2. Rotate the TUNE knob and select the first digit (0 or 1).
3. Push the TUNE knob again.
4. Rotate the TUNE knob and select the second digit (1-8).
5. Push the TUNE knob again.
6. Rotate the TUNE knob and select the third digit (1-9). The tuner will
start playing the station you have selected when the third digit stops
flashing.
Preset Sirius Satellite Radio Stations
Programming Satellite Radio Stations: You can program up to 20 Sirius
Satellite radio stations.
1. Select from SR1, SR2, SR3 or SR4 by pushing the BAND button
repeatedly.
2. Tune to the desired radio station (see Sirius Satellite Radio Operation
for more details).
3. Push and hold one of the five STATION RECALL buttons
until a short "beep" is heard. The corresponding preset
button number now appears in the lower right hand
corner of the display.
4. To program additional preset stations, repeat this procedure using the
other STATION RECALL buttons as desired.
Recalling Satellite Radio Stations:
1. Select from SR1, SR2, SR3 or SR4 by pushing the BAND button
repeatedly.
2. Push button 1, 2, 3, 4 or 5 to recall a preprogrammed radio
station.
Automatically Recalling Satellite Radio Stations:
1. Select from SR1, SR2, SR3 or SR4 by pushing the BAND button
repeatedly.
2. Push AS/PS button and release to automatically scan every 5 seconds
the pre-programmed radio stations. To stop scanning push the AS/PS
button again.
16
(Continued)
TUNE/TRACK/CH
PUSH
SCAN/S-MOD/SETUP
TUNE/TRACK/CH
PUSH
SCAN/S-MOD/SETUP
BAND W-BND
REPEAT SHUFFLE INTRO
BAND W-BND
REPEAT SHUFFLE INTRO
BAND W-BND
MODE AS/PS