Chrysler Pacifica 2021 Owner's Manual page 280

278 SAFETY
What is the weight limit (child's
weight + weight of the child restraint)
for using the Tether Anchor with the
seat belt to attach a forward facing
child restraint?
Can the rear-facing child restraint
touch the back of the front passenger
seat?
Can the rear head restraints be
removed?
Can the buckle stalk be twisted to
tighten the seat belt against the belt
path of the child restraint?
NOTE:
If the folding, non-adjustable head restraint interferes with the installation of the child restraint, the head restraint may be folded and the child seat installed in
front of it.
Always make sure the head restraint is in its upright position when the seat is to be used by an occupant who is not in a child restraint. Sitting in a seat with
the head restraint in its lowered position could result in serious injury or death in a collision.
Frequently Asked Questions
Weight limit of the Child Restraint
Yes
Yes
No
WARNING!
Always use the tether anchor when using the seat belt to install a forward
facing child restraint, up to the recommended weight limit of the child
restraint.
Contact between the front passenger seat and the child restraint is allowed, if
the child restraint manufacturer also allows contact.
The 2nd row head restraints on bench and the center head restraint in the 8
passenger vehicle can be removed if they interfere with the installation of the
child restraint. 2nd row Stow 'n Go head restraints are not removable. The 3rd
row center head restraint is removable in all vehicles, but the 3rd row
outboard head restraints are not removable
Do not twist the buckle stalk in a seating position with an ALR retractor.
page 50.
Ú