Chrysler Pacifica 2021 Owner's Manual page 106

104 GETTING TO KNOW YOUR VEHICLE
Removing Crossbars
CAUTION!
Use care when removing and handling the
crossbars to prevent damage to the vehicle.
2. Bend the crossbar supports at each end,
taking care to keep hand clear of pivoting joint.
Slide the thumb screw down.
Bending Pivot
3. Position the crossbars across the roof making
sure the letters on the crossbars align with the
matching letters on the side rail.
Positioning Crossbars
4. Once the crossbar is in place, tighten both
thumb screws completely.
Installing Crossbars
5. Deploy and tighten the second crossbar to
complete the deployment of the crossbars.
NOTE:
The crossbars are not identical and have fixed
deployment positions. Rear crossbar can be
deployed in two different positions.