Advertisement
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
LOUVER DIFFUSER INSTALLATION — TYPE VUL
Assemble As Follows:
1
1. Remove the four
/
" machine screws which hold the bottom
4
panel of the heater to the heater chassis.
2. Turn diffuser blades to vertical position.
3. Place diffuser frame against bottom panel of heater and re-
insert four machine screws through the gusset plates inside the
louver frame and through the same holes in bottom panel from
which machine screws were previously removed. Tighten the
machine screws, making sure the lockwashers are still in place.
Note: The louver blades may be re-assembled to make the
air pattern unidirectional. It is not recommended that the
louver blades be closed more than 45°.
Limited Warranty:
Please refer to the Chromalox limited warranty applicable to this product at
http://www.chromalox.com/customer-service/policies/termsofsale.aspx.
1347 HEIL QUAKER BLVD., LAVERGNE, TN 37086
Phone: (615) 793-3900
www.chromalox.com
Advertisement
