Chain Dialing From Memory; Message Indicators - GE 29897GE1 User Manual

Chain Dialing from Memory

Use this feature to make calls which require a sequence of numbers, for instance if
you use a calling card for a frequently called long distance number. Basically, you dial
each part of the sequence from memory. The following example shows how you can
use chain dialing to make a call through a long distance service:
The Number For
Long distance access number
Authorization code
Frequently called long distance number
1. Pick up the handset.
2. Press DIAL/ENTER and then press 7.
3. When you hear the access tone, press DIAL/ENTER and then press 8.
4. At the next access tone, press DIAL/ENTER and then 9.

Message Indicators

The following special messages indicate the status of a message or the unit:
00 CALLS
UNKNOWN CALLER The incoming call does not have Caller ID service or their
BLOCKED CALL
ERROR
START OF LIST/
END OF LIST
MEMO

The call record log is empty.
service area is not linked to yours. If UNKNOWN NAME
appears along with a calling number, the name information for
that number was not available.
The caller is registered as "Private Number" and the Caller ID
information is withheld.
Caller information has been interrupted during transmission.
Indicates you are at the beginning or the end of the call record
log.
The message has been recorded as a memo.
Memory Location
7
8
9