Storing Caller Id Records; Changing A Stored Number; Dialing A Stored Number; Inserting A Pause In The Dialing Sequence - GE 29897GE1 User Manual

Example:
To store 1 123 555 1211 Al Smith, you would do the following:
1. Press 1; press NEXT; press 1; press 2; etc.
2. When finished, press STORE.
3. To enter the name, press 2; press NEXT; press 5 (three times); press NEXT (two times);
press 7 (four times); etc.
4. When finished, press STORE.
5. Press the memory location number (0-9 or A,B,C) to store.

Storing Caller ID Records

You can also store Caller ID records in memory. Rather than re-entering the
information the traditional way, you can store the record in a memory location or
quick dial button.
1. Use the NEXT or REVIEW buttons to scroll to the Caller ID record you want to store.
Press DIAL button to change the format (11 or 10 or 7 digits number format) as
desired.
2. Press STORE.
3. Press the memory location number (0-9 or A, B, C) to store the record.

Inserting a Pause in the Dialing Sequence

Press the REDIAL/PAUSE button to insert a delay in the dialing sequence of a stored
telephone number when a pause is needed to wait for a dial tone (for example after
you dial 9 for an outside line, or to wait for a computer access tone). Each pause is
represented as "P" on the display and counts as 1 digit in the dialing sequence.

Changing a Stored Number

Use the same procedure to change a stored number as you do to store a number–
you're just replacing the phone number with a different one.

Dialing a Stored Number

1. Pick up the handset or press SPEAKER.
2. Press DIAL/ENTER. MEMORY DIAL=? is displayed.