1MRK 514 030-UEN Rev. C
Section 1
1.1
This manual
The installation manual contains instructions on how to install the IED. The manual provides
procedures for mechanical and electrical installation. The chapters are organized in the chronological
order in which the IED should be installed.
1.2
Intended audience
This manual addresses the personnel responsible for installing the product hardware.
The installation personnel must have basic knowledge of handling electronic equipment.
1.3
Product documentation
1.3.1
Product documentation set
Engineering manual
Installation manual
Commissioning manual
Operation manual
Application manual
Technical manual
Communication
protocol manual
Cyber security
deployment guideline
IEC07000220 V4 EN-US
Figure 1:
Switchgear control unit SAM600-IO
Installation manual
Introduction
The intended use of manuals throughout the product lifecycle
© 2017 - 2021 Hitachi Power Grids. All rights reserved
Section 1
Introduction
GUID-AB423A30-13C2-46AF-B7FE-A73BB425EB5F v20
GUID-C9B8127F-5748-4BEA-9E4F-CC762FE28A3A v11
GUID-3AA69EA6-F1D8-47C6-A8E6-562F29C67172 v16
IEC07000220-4-en.vsd
3