Advertisement
FOCUSING – THE FOCUS AREA
Due to the conditions we photograph in while on location in the
shopping centres the best focus area mode is Auto-area AF. This mode
is where the camera automatically detects subjects and selects the
focus point(s). Follow the steps below to select the correct (Auto
Focus) AF-area mode.
1.
If the shooting information is not displayed on the monitor
display press the "info" button.
2.
Press the "i" button, then highlight the current AF-area
mode on the screen display and press OK .
3.
Highlight the Auto-area AF symbol and click OK .
PRESET MANUAL WHITE BALANCE PROCEDURE
1.
Press the Menu button
3.
If the option is selected on PRE Pre-set manual, then
press OK .
If not use the right arrow to navigate to the PRE
option, then press OK.
5.
Take a photo of your white balance sheet.
Hold the white sheet where the customers being
photographed will be standing/seated. Zoom in using
the lens to make the white sheet fill the camera
frame.
2.
Using the keypad multi-selector, select the (camera
icon) Shooting Menu - Tab 2. Select White Balance
4.
The camera will ask you if you would like to
measure or use photo.
Select measure as we are measuring the white
balance for our on-location lighting set up and
everyday can be different.
6.
Overwrite existing data – select YES!
The camera should say "Data Acquired ".
If the Camera comes up with the error " Data Not
Acquired" repeat the steps again.
Advertisement
