Table of Contents
Advertisement
5 Connect the terminals
Use a suitable cable with wire-end ferrules.
61 90 5 A1E 1B1
61 90 5 A1E 1B2
61 90 5 A1E 1B4
Note: It is also possible to use
a single-phase connection for
the BMW Wallbox. To do so,
connect terminals L1, N and PE
5.1 Input X1 (optional)
Note: The safe isolation of dangerous voltages must be guaranteed.
16
61 90 5 A1E 1B3
61 90 5 A1E 1B5
Connect the cable to connection X1.
The enabling input is designed for use with a
floating contact. The enabling input allows the
Wallbox to be controlled by external components.
Connect each terminal to the
correct connection on the input
terminal strip. Then secure
the terminal for the input cable
correctly.
Note: Select a suitable cable
to comply with all current local,
state and national regulations
and standards for electrical
systems. Ensure that the circuit
breaker is switched off before
installation.
Hide quick links:
Advertisement
Table of Contents
