Table of Contents
Advertisement
https://arttel.ru/
Room monitoring
When the room monitor is switched on, the stored (internal or external) destination number is
called as soon as a defined noise level is exceeded in the vicinity of the handset. The alarm to an
external number is cancelled after approximately 90 seconds.
You can answer the alarm using the Two Way Talk function. This function is used to switch the
loudspeaker of the handset located in the room being monitored on or off.
In room monitor mode, incoming calls are only indicated on the display (without ringtone). The
display backlight is reduced to 50%. Advisory tones are deactivated. All keys are locked, with the
exception of the display keys and the ability to press the centre of the control key.
If you accept an incoming call, the room monitor mode is suspended for the duration of the call,
but the function remains activated. The room monitor mode is not deactivated by switching the
handset off and on again.
Activating and setting the room monitor
¤
Switch on/off:
¤
Enter destination:
¤
Activate/deactivate two-way talk:
¤
Set microphone sensitivity:
¤
Save settings:
The destination number is displayed in idle display when the room monitor is activated.
36
https://arttel.ru/shop/dect-ip-telefony/gigaset-sl750h-pro
The handset should be positioned 1 to 2 metres away from the area of the room being
monitored. The microphone must point towards the area of the room being
monitored.
Activating the function reduces the operating time of your handset. For that reason,
place the handset in the charging cradle if necessary.
The room monitor is activated 20 seconds after switching on.
The answer machine for the destination number must be switched off.
After switching on:
Test sensitivity.
¤
Test the connection, if the alarm is being forwarded to an external number.
¤
. . . use
to select
OK . . . then
Room Monitor
Activation: . . . use
Send alarm to
Internal
External:
Number
number
or select a number from the directory:
Internal:
Handset
select the handset
Two Way Talk
. . . use
Sensitivity
Save
Additional Features
to select On or Off
. . . use
to select External or
. . . use
to enter the
. . . use
Change
OK
. . . use
to select On or Off
to select High or Low
OK
Room Monitor activated
INT 1
Room Monitor
0891234567
to
OFF
07:15
14
Oct
Options
Advertisement
Table of Contents
