Table of Contents
Advertisement
Ensure that the hoses
are not kinked, crushed
or entangled.
Electrical connection
WARNING!
Safety standards require the appliance to be
earthed. Prior to using the appliance for the
first time, ensure that the rated voltage and
type of supply on the rating plate match that of
the supply where the appliance is to be
installed. The fuse rating is also to be found on
the rating plate.
Always plug the mains plug into a correctly
installed shockproof socket.
When connecting the
drain hose to an under
sink trap spigot, the
entire plastic
membrane (A) must
be removed. Failure to
remove all the
membrane will result in
food particles building
up over time eventually
blocking the dishwasher
drain hose spigot
CAUTION!
Always be sure, that there is no water leakage
from hoses and their connections after the
installation.
WARNING!
Multi-way plugs, connectors and extension
cables must not be used. This could constitute
a fire hazard through overheating.
If necessary, have the domestic wiring system
socket replaced. In case that the electrical
cable has to be replaced, contact your local
Service Force centre.
The plug must be accessible after the
appliance has been installed.
Never unplug the appliance by pulling on the
cable. Always pull the plug.
IMPORTANT!
The manufacturer accepts no liability for failure
to observe the above safety precautions.
29
Advertisement
Table of Contents
