Table of Contents
Advertisement
Setting the water softener manually (see table)
The water softener is factory set at position 2.
Setting the water softener electronically (see table)
The water softener is factory set at position 5.
1. Press the On/Off button. The dishwasher
must be in setting mode.
2. Simultaneously press and hold function
buttons B and C, until the lights of function
buttons A, B and C start flashing.
3. Press function button A, the lights of
function buttons B and C turn off while the
light of function button A goes on flashing.
In the digital display is visible the current
level.
Examples:
displayed = level 5
displayed = level 10
12
Set switch to position 1
or 2
4. To change the level, press function button
A. Each time the button is pressed the level
changes. (For the selection of the new level
see the chart).
Examples:
if the current level is 5, by pressing function
button A once, level 6 is selected.
if the current level is 10, by pressing
function button A once, level 1 is selected.
5. To memorise the operation, switch off the
dishwasher by pressing the On/Off button.
Advertisement
Table of Contents
