NEC DS1000 Manual page 12

Features
8
- Enter the trunk number (e.g., 1 for trunk 1), trunk group number (e.g., 90 for group 0), or ICM
to store Intercom codes + HOLD . (Check with your Communications Manager for your trunk
and trunk group numbers.)
- Following Speed Dial programming methods, enter the number you want to store (up to 16
digits long, including MIC to store a pause and FLASH to store a Flash) + HOLD to exit.
- You cannot enter a name using this option.
- If you already have a number stored in bin 20, you see:
- Press Yes to enter a new number or No to back up to step 4.
OR
If you pressed VIEW to view your currently stored number, you see:
- Press SPK to exit the VIEW mode.
6. You see:
7. Select the Call Forwarding type:
- Dial 2 or press ALL to forward all calls.
- Dial 8 or press TRNK to forward just trunk calls.
8. Once returning to idle, your telephone display will show:
- FWD OFP indicates that Off Premise Call Forwarding is enabled, followed by the number.
- If you selected a Speed Dial bin with a stored name, the name will display instead.
To cancel Call Forwarding Off Premise:
1. Press the ICM key and dial *3 , or press your Call Forwarding key.
OR
Press CLEAR + PGM + CFWD . You see:
2. Press NONE .
OR
Dial 0 .
OR
Press CLEAR .
3. Off Premise Call Forwarding is cancelled.
DS1000/2000 Feature Handbook Supplement