3Com 3C16476CS User Manual page 46

46 C 4: C
HAPTER ONFIGURING THE
Guidelines for Creating Trunks
Any port on the Switch can be used for creating a
■
trunk.
This switch supports a maximum of four trunks.
■
Each trunk may contain up to four members.
■
A port may only be a member of one trunk at any
■
one time.
All ports in a trunk must be configured in an
■
identical manner, including communication mode
(that is, speed, duplex mode and flow control).
Four tabs are available on the Port Link Aggregation
page:
Summary
■
Create
■
Modify
■
Remove
■
Summary
Use the Summary tab to display Group ID, Port
members, and Link Type for a list of link aggregate
groups.
S
WITCH
Figure 41 Link Aggregation Summary Screen
Create
Use the Create tab to add ports to a group
membership.
Figure 42 Link Aggregation Create Screen
To create a new link aggregation group:
Enter a link aggregation group ID in the box field.
1
Select the ports to add to the goup.
2
Click Apply.
3