Control Lockout; Gas/Control Lockout - GE JGB800DEP Owner's Manual & Installation Instructions

Gas/Control Lockout (on some models)
G C
/
AS ONTROL
Your control will allow you to lock out the
L
OCKOUT
surface burners, oven burners and control
panel so they cannot be activated.
To lock/unlock the controls:
Control Lockout (on some models)
Your control will allow you to lock out the
touch pads so they cannot be activated when
touched or cleaning the glass panel.
To lock the controls:
12-Hour, 24-Hour or Clock Blackout
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour
military time clock or black out the clock
display, follow the steps below.
Turn all surface burners off.
Touch and hold the Gas/Control
Lockout pad for 3 seconds until the
display shows LOC ON.
To unlock the control, touch and hold the
Gas/Control Lockout pad for 3 seconds
until the display shows LOC OFF.
Touch the 9 and 0 touch pads at the
same time for 3 seconds until the
control beeps twice. The display will
show LOC continuously and the time
of day if not blacked out.
Touch the Bake and Broil Hi/Lo
pads at the same time for 3 seconds
until the display shows SF.
Touch the Clock pad once. The display
will show 12 hr. If this is the choice you
want, touch the Start pad.
GEAppliances.com
When this feature is on and the touch pads
are touched, the control will beep and the
display will show LOC ON.
■
The control lockout mode affects all
controls. No controls will work when this
feature is activated.
■
The adjustment will be retained in memory
after a power failure.
NOTE: All cooking and timing functions will be
cancelled when locking out the control.
To unlock the control, touch the
9 and 0 touch pads at the same time
for 3 seconds until the control beeps
twice, and LOC will be removed from
the display.
NOTE: Some models have a Control Lockout
pad. Touch and hold it for 3 seconds to
lock/unlock.
Touch the Clock pad again to change
to the 24-hour military time clock. The
display will show 24 hr. If this is the choice
you want, touch the Start pad.
Touch the Clock pad again to black out the
clock display. The display will show OFF. If
this is the choice you want, touch the Start
pad.
NOTE: If the clock is in the blackout mode,
you will not be able to use the Delay Start
function.
25