Change The Iot Wifi Password Or Security Level - NETGEAR SXR50 User Manual

Orbi Pro WiFi 6 AX5400 Router Model SXR50 and Orbi Pro WiFi 6 AX5400 Satellite Model SXS50
7. To separate the single SSID for the Wireless 3 network in an SSID for the 2.4 GHz
band and another SSID for the 5 GHz band, select the Enable SSID separation for
2.4G/5GHz check box.
For each band, a Wireless 3 Network Name (SSID) field displays. The SSID for the
5 GHz band is appended with _5G, but you can also type another name.
By default, the Wireless 3 network provides a single SSID for both bands.
8. To change the Wireless 3 network name (SSID), type a new name in the Wireless 3
Network Name (SSID) field.
The name can be up to 32 characters long and it is case-sensitive. The default SSID
is derived from the randomly generated SSID that is on the router's label . If you
change the name, make sure to write down the new name and keep it in a safe place.
9. Although the preset IoT VLAN profile for the Wireless 3 network works well for most
situations, if you want to change the VLAN profile, select the VLAN Profile check
box, and select another VLAN profile from the menu.
The preset VLAN profile name is IoT, the VLAN has ID 30, and the combination is
shown in the menu as IoT(30).
For more information about VLANs, see Manage the VLANs on page 70, including
How the router organizes LANs, VLANs, and WLANs on page 72.
10. Click the Apply button.
Your settings are saved. The router sends the new settings to the satellite.
11. Make sure that an IoT device can connect to the WiFi network with its new settings.
If you cannot connect using WiFi, check the following:
• Is your WiFi-enabled computer or mobile device connected to another WiFi
network in your area? Some WiFi devices automatically connect to the first open
network without WiFi security that they discover.
• Is your computer or mobile device trying to connect to your network with its old
settings (before you changed the settings)? If so, update the WiFi network
selection in your computer or WiFi device to match the current settings for your
network.

Change the IoT WiFi password or security level

You must be connected to the admin network to change the IoT password and security
level (authentication and encryption settings). The router supports Wi-Fi Protected
Access 3 (WPA3), WPA2, and mixed WPA + WPA2, including enterprise level WPA3
and enterprise level WPA2.
Manage the WiFi Networks 96 User Manual