TP-Link TL-WR702N Manual page 9

How To Setup ASUS WL
PNOmation II
your Home Network
ASUS 330N3G
DISCONNECT the Ethernet cable from PMII or the ASUS device.
For best results, go to qrsmusic.com. to download and install the latest PMII driver update. Instructions using Driver V3.66.
If the "Power" light is yellow, tap the PLx button once so that the light turns green.
Point the remote at the button on the PLx box. The "System" light will flash, w/ voice prompts, on remote control commands.
Using a QRS Remote: Press SHIFT then FUNC then 9 9 1.
If you have one of the smaller QRS remotes: press F1/Source then 9 9 1.
The PLx Network light should now be yellow.
Press and Hold the "Restore' button,
View the available wireless devices using your iPad, iTouch, Android device or Wireless Computer.
Connect to the "ASUS" from the list and wait until a connection is established.
Apple devices may automatically open the Authentication screen when connection.
Enter admin in the User Name and Password fields.
If you are using an Android or a Computer and Google Chrome:
In your web browser, enter 192.168.1.1 in the URL address window.
Enter admin in the User Name and Password fields.
Click Log In (Apple) or click the OK (Android/Chrome) button.
Programming window opens.
Select Network Adapter.
Close Help
Select your local wireless Network device from the Site Survey list.
Click the Connect button.
Enter your Network Key if requires and press Connect.
The ASUS will connect, save and restart with the new settings.
Close the browser window when 100% complete.
Connect your wireless device to your home network.
Reconnect the Ethernet cable
Wait for the voice prompt to report: "Network"..."Connected"..."IP Address is...192.168.1.xxx".
[FUNC INFO to repeat the IP Address]
Open your web browser and enter the IP address and connect to PNOmation II through your home Network.
330N3G
Your wireless network router
Wireless or Cable
connection to
set as an Ethernet Adapter
on the back of the ASUS
Wireless for PMII in Network Mode
Internet Modem
, until the "power" light flashes at least 3 times.
Google
Computer
Android Device
Apple iPad/iTouch
PMII gets its IP address
from your home network
Power System Network
Apple
or
or
Android