TP-Link TL-WR702N Manual page 7

Music wifi adapters

Hide thumbs Also See for TL-WR702N:

[Windows 7 & Google Chrome Example]

You will need the information about your home network:

Network Name (SSID)

Encryption Type

Key Type

Encryption Key

On the QRS PNOmation II remote control:

Press the following buttons in sequence...

SHIFT FUNC 9 9 1

Third light flashes red/green and then solid yellow.

Connect to QRSPNO.

Open Google Chrome, Android browser, or Safari, and navigate to 192.168.0.1

Enter "admin" as the User Name and Password.

Select "Wizard".

Press the "Next" button.

Select "Client Bridge Mode"

Press the "Next" button.

Enter the Network Name (SSID) to match your home Wi-Fi device.

Click on the Encryption drop-down box and select mode to match your home Wi-Fi.

Select/Enter the following to match your home's Wi-Fi device:

Encryption Type

Key Type

Encryption Key

Press the "Next" button.

Verify "Setup Successful"

Press the "Reboot" button.

Wait for system reboot.

Close browser.

Connect to your home network.

On the QRS PNOmation II remote control:

Press the following buttons in sequence...

SHIFT INFO

Note the IP address heard from the speaker.

Open Safari or Google Chrome and enter the IP address heard from the speaker.

How to Configure the EnGenius

ETR9330

for QRS "Network" Mode:

Table of Contents