TP-Link TL-WR702N Manual page 6

Music wifi adapters

Hide thumbs Also See for TL-WR702N:

How to Reset the EnGenius

ETR9330

for QRS' "Default" Stand Alone Mode:

[Windows 7 & Google Chrome Example]

Press and hold the WPS button for about 10 seconds. Release after the power button flashes a few times.

Connect to the EnGenius xxxx Wi-Fi device.

Open Google Chrome, Android browser, or Safari, and navigate to 192.168.0.1

Enter "admin" as the User Name and Password.

Press the "Log In" button.

Select Wireless

Enter "QRSPNO" for SSID1.

Press the "Apply" button.

Wait for the EnGenius to reload.

Connect to QRSPNO.

Open Google Chrome, Android browser, or Safari, and navigate to 192.168.0.1

Enter "admin" as the User Name and Password.

Press the "Log In" button.

Select System / LAN.

Select "User-Defined" option from the Secondary DNS drop down box.

[Can't get to this setting using an iPad]

Enter "192.168.1.1" as the Secondary DNS address.

Press the "Apply" button and wait for EnGenius to reload.

Close browser.

On the QRS PNOmation II remote control:

Press the following buttons in sequence...

SHIFT FUNC 9 9 0

The third light should be green.

Press SHIT INFO to confirm the 192.168.1.1 address.

Verify that you are still connected to QRSPNO

Open your browser to 192.168.1.1 to connect to PMII.

Table of Contents